Please visit my general install page for overall instructions

I sell brake controllers, so please, if you need one click here! We keep Prodigy P2 Brake Controllers in Stock Regularly!

"Standard" Wire colors to the controller (Tekonsha and others):
- Black, Battery Positive to controller
- White, Negative Ground for Controller
- Blue, Brake feed from controller to Trailer plug at back of truck
- Red, tap into truck Brake light switch signal to tell controller to apply brakes

Simple "Plug and play" set on these trucks with the tow package. Find the plug under the dash, plug in the controller, mount the controller, done!

With 2 or 3 screwdrivers, carefully pry out change pocket



Un-plug it from back of change pocket